Tools
and supplies:
 Miter saw
Safety goggles
Hammer
Stakes
String
Oversized right angle
Tape measure
Ribbon
Bucket with bottom removed
Powdered chalk
Posthole digger
Post level
Clamps
1-gallon container (for water)
Screws
Power drill
Assorted drill bits
Socket wrench
Materials:
6 Posts - 6x6 (length to be determined by footings)
4 Beams - 2x10's - 10' long
16 Rafters - 2x6's - 10' long
12 Bolts - 3/8" x 10" -- galvanized
24 Washers - 3/8" -- galvanized
12 Nuts - 3/8" -- galvanized
64 Hurricane ties - 4 for each rafter
Hot-dipped galvanized bracket nails
Long 2 X 2
30 bags of concrete
3 bags of crushed rock
Scrap lumber for temporary braces
Scrap lumber for spacer boards
Note: This list is based on this specific project
and situation. Please adjust these items and instructions to your
particular needs.
|
