How to Design and Build an Attached Pergola - Tools Needed
|
| |
| Learn how to design and build a pergola; watch a video demonstrating how the ledger, posts and beams fit together.
|
Tools
and supplies:
 Tape measure
Combination square
Safety goggles
Jig saw
Cordless drill
A second cordless drill
Assorted drill bits
Countersink bit
Assorted driver bits
Square head driver bits
Carbide tip masonry bit
Hammer drill
Socket wrench
Hammer
Stakes
Scrap wood for temporary supports
Pencil
Japanese hand saw
Materials:
1 x 6 or 1 x 8 cedar, redwood or pressure treated pine
4 x 4 lumber for posts
Lag screws (length as needed)
Post brackets
Expansion anchors
Metal post supports
1 ½" 10d heavy galvanized nails
Screws
Square head stainless steel screws
Clamps
Sandpaper
Note: This list is based on this specific project
and situation. Please adjust these items and instructions to your
particular needs.
|
